Model No.: TPM3016
1. The lathe consists of lathe bed, work table, gantry, slide carriage, power head, CNC system, cooling chips discharge system etc.
2. The lathe works in mode of lathe bed and gantry being fixed and work table moving.
3. The lathe bed and gantry are weld assembly, work table is iron casting, which was high temperature annealed before processing, was annealed again after half finished machining to remove stress, then finished machining so that ensure stable precision.
4. The lathe has 3 numeric control axes; a heavy linear guide is equipped on the lathe bed. The work table can make longitudinal movement along the guide(X axis), the gantry cross beam has a linear guide too; the slide carriage can make lateral movement along the guide (Y axis). Sliders are equipped on the slide carriage, a guide on power head which can make vertical movement on the slide carriage.
5. The power head spindle is precision spindle of Taiwan KENTURN / Taiwan Xutai, which is driven by special frequency conversion motor and can make stepless speed regulation according to needs. The spindle is BT50 taper hole. The drilling head, reamer or milling cutter can be installed by splice bar. The spindle box has a loose cutter cylinder (air and hydraulic pressure) for easily changing cutters. It also can equip with cutter inter-cooled splice bar to realize high speed cutting.
6. The chip cleaner equipped at the back of work table can discharge chips automatically. The lathe use water cooling with the system of cooling liquid providing, recycling, circulating and filtrating.
7. Numerical control uses FAGOR8055 system, with RS232 connector and color LED panel, Chinese interface. It can make spot / external PC workpiece input and be easily operated.
8. Protective covers are equipped for X/Y axis guides and lead screw of the lathe. Iron sheet cover is for X axis, and organ-protective cover for Y axis.
9. For ensuring the reliability of the lathe, the key components use high quality imported products. See the main spare parts list for details.
|Max. size||L X W||3000X1600mm|
|Work table||Width of T slot||28/500mm|
|Vertical slide type drill head||Quantity||1|
|Main spindle taper hole||BT50|
|Max drill diameter(common carbon steel)||φ40mm(carbide drill)|
|φ50mm(HSS twist drill)|
|Main spindle speed||30-2400r/min|
|Motor power of spindle||22/33kW|
|Distance between spindle tip to work table||300-800mm|
| (X axis) |
Gantry longitudinal move
|Moving speed of X axis||0-8m/min|
|Servo motor power of X axis/torque||3kW/28.4Nm|
| (Y axis) |
Power head transversal move
|Moving speed of Y axis||0-8m/min|
|Servo motor power of Y axis/torque||3kW/28.4Nm|
| (Z axis) |
Vertical slider feeding
|Stroke of Z axis||500mm|
|Feeding speed of Z axis||0-5m/min|
|Servo motor power of Z axis/torque||3kW/28.4Nm|
|Positioning accuracy||X/Y axis||≤0.1mm/ Full length|
|Repositioning accuracy||X/Y axis||≤0.05mm|
|Hydraulic system||Hydraulic pump pressure/flow rate||6.5MPa /25L/min|
|Hydraulic pump motor power||3kW|
|Pneumatic system||Compressed air pressure||≥0.4MPa|
|Chip cleaning and cooling||Chip cleaner type||Plate chain type|
|Chip cleaner no.||2|
|Chip cleaning speed||1m/min|
|Chip cleaner motor power||0.75kW|
|Motor power of inner cooling water pump||3kW|
|Motor power of Outer cooling water pump||0.75kW|
|Automatic lubricating system||Lubrication pressure||2MPa|
|Lubrication point oil injecting amount||0.1mL|
|Electric system||CNC system||FAGOR8055|
|CNC axis NO.||4|
|Whole power of motors||Approx. 48kW|
|Overall size||LxWxH||Approx. 5800X5800X3600mm|
Main Components List:
|Main electric components|
|1||CNC system||8055||Spain FAGOR|
|4||Variable frequency motor for spindle||YPNC-50-22-4-B/B5||Shanghai Senlima|
|5||frequency transducer of spindle||22kw||Germany Siemens|
|6||low-voltage apparatus||ALL||France Schneider/SIMENS|
|7||Business computer||LCD||China Lenovo|
|8||Proximity switch||Normally open|| Germany BEDOOK |
|Main hydraulic components|
|1||magnetic valve||All||ATOS Italy|
|2||Hydraulic cutter receding cylinder||H1000(S=20)||Taiwan|
|main mechanical parts|
|1||spindle||BT50||Taiwan KENTURN/ Taiwan Xutai|
|2||Power head bearing||All||Japan NSK|
|3||ball-screw||All||Taiwan HIWIN or TBI|
|4||Linear guide||X/Y axis||Taiwan HIWIN or PMI|
|5||Linear guide||Z axis||Switzerland SCHNEEBERGER|
|6||cable drag chain||All||Germany IGUS|
Spare Parts List:
|1||Proximity switch||Normal open||1||Germany BEDOOK|
|2||Proximity switch||Normal close||1||Germany BEDOOK|
|3||Indexable insert drill||880-D2500L25-05||1||SANDVIK|
|4||Indexable center blade||880-05 03 05H-C-GM 1044||5||SANDVIK|
|5||Indexable surrounding blade||880-05 03 W05H-P-GM 4024||5||SANDVIK|
|6||Special screw for blade||1||SANDVIK|
|7||Bit extension||A2B27-50 25 090||1||SANDVIK|
|8||Spring collet||A2B14-50 25 100||1||SANDVIK|
|9||Spring jacket||393.14-25 120||1||SANDVIK|
|10||BT Oblique shank drill sleeve||BT50xMT4||1||MADE IN CHINA|
|11||HSS twist drill||¢50||1||MADE IN CHINA|
|12||Carbide-tipped milling cutter||¢12||1||MADE IN CHINA|
|13||Pop-rivet||BT50, 45°center cooling||2||MADE IN CHINA|
|14||Pop-rivet||BT50, 45°||2||MADE IN CHINA|
|15||Photoelectric edge finder||OP-20||1||Taiwan SYIC|
|16||BT/ER end mill chuck||BT50x ER32-80||1||Taiwan SYIC|
|17||Spring jacket||ER32-20||1||Taiwan SYIC|
|18||Socket head wrench||1 set||WALTON|
|23||Standby paint||Yellow, gray||2|
|26||FAGOR 8055 operation manual||1|
|27||FAGOR 8055 programming manual||1|
|28||FAGOR 8055 error troubleshooting manual||1|
|30||Certification of conformity||1|
|31||Spare parts list||1|
|1||Contour block||150 mm x100 mm x50 mm||15|
|4||Double end stud||M20,300mm||5|
|5||Double end stud||M20,400mm||5|
|1||Ground anchor||B2, 450mm||8|
|2||Ground anchor cover plate||8|
|3||Ground anchor spanner||1set|
|4||Adjustable pad steel||S85-2(200mmx100mmx80mm), M16||20 sets|
|5||Foundation bolt||M24x500(GB/T 799)||20|
Shandong Sunrise CNC Machine Co., Ltd
SUNRISE CNC MACHINE CO.,LTD located in Jinan Economic Development Zone, is a speclist company dedicated to developing, studing, designing, manufacturing, selling CNC machines.
For example, plate drilling machine, plate punching machine , U I H Channel beam band sawing machine, angle punching marking dhearing production line, angle drilling marking production line, connector steel punching drilling machine, bending, beveling, chamfering, milling, welding machines, plasma cutting and other optical-electro-mechanical integration equipments.
Mainly used for processing angle steel, metal plate, H-beam, channel steel, box steel, round steel, flange plate and etc in power tower, transmission tower, telecom tower, steel struture, central air-conditioner, automobil, household appliance, petrochemical, construction, bridge, boiler and chemical engineering industries.
Also we built subsidiary company Sunrise CNC Technology, which for design and manufacture engraving and cutting cnc router, wood lathe, laser cutting machine, stone cnc router, fiber laser cutting machine, plasma cutting machine etc, almost of metal & nonmetal materials could cutting and engraving well.
Mainly used in wood furniture, advertising, stone industry etc.
Experienced and dynamic professionals team who are expert in handling precision work through scientific processes.
The professional excellent talents unite a powerful and creative team of design, reserch and development, which built our solid technical strength and competitiveness.
By 10 years experience, now Sunrise CNC is a leading manufacturer in China, not just for high quality, also service and honest.
Manufacturing custoner oriented products has always been our supreme concern. We believe that quality is the soul of an enterprise forever.
Therefore, we never compromissed with the quality of our products. We adopt advanced, scientific modern management ideas and system to realize supervisory control among all aspects of produce, inspection, sale and service etc. which help control quality, increased work efficiency and guaranteed products' stability and precision. Therefore, the enterprise can achieve rapid and sustainable development.
Sunrise is focus on quality and company's image. We win market with good quality and service. The company has already passed International Quality Management System ISO9001:2008 certification for many years and smoothly got the title of High and New Tech Enterprises. And has more than ten own intellectual property rights and patent technology. We have own import and export right. Our products exported to Russia, South Asia, South east Asia, Middle east, South America, Africa, Australia, and Europe etc.
Quality made brand, honesty win market, harmony converg talents, and innovation promote development. Our ability to consistently provide innovative, high quality products that outlast and outperform the competition, is why we are the one of the most successful companies offering the most advance and productive solutions in the cnc machine industry.
More information pls contact us feel free!
- Company Name: Shandong Sunrise CNC Machine Co., Ltd
- Representative: Guo Hongtao
- Product/Service: Angle Punching Marking Shearing Line , Angle Drilling Marking Line , Drilling Machine , Punching Machine , Beam Sawing Machine , CNC Router
- Capital (Million US $): $100.00 Millon
- Year Established: 2000
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 51% - 60%
- Total Annual Purchase Volume (Million US $): US$5 Million - US$10 Million
- No. of Production Lines: Jinan Sunrise CNC Machine Co., Ltd
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: No.8299,West of Jingshi rd. Jinan, Shandong, China
- Contact Person: Ms. Melody
- Tel: 86-0531-55611277
Premium Related Products