Tungsten Carbide Brazed Inserts with High Quality

Model NO.: YG3, YG6X, YG6, YG8, ect


Material: PCBN


Style: Special Props


Cutting Process: Drilling Tools


Turning Tools Type: Face Cutting Tool


Milling Cutter Type: Milling


Specification: hardmetal




Type: Cutter


Standards: K


Structure: Integral


Work Type: Cut Off


Boring Tool Type: Fine Boring Tool


Trademark: ZZ HARDMETAL


Origin: Zhuzhou


products details:

We have grades for all woodworking applications.



High hardness and wear resistanct - Special grades for chipboard, MDF & HDF.

Hard wearing - grades for all hardwoods.

Fine grain with toughness - soft woods

High toughness & Impact resistant - Raw primary timber.

Utility grade - general purpose application.



Details:


Grade for Tungsten carbide brazed tips/inserts:

GRADE	ISO GRADE	DENSITY (g/cm3)	HARDNESS (HRA)	TRS (N/mm2)	Applications recommended
YG3	K05	15.10	92.0	1400	Suitable for finishing of cast iron and nonferrous metal.
YG6X	K10	14.95	91.5	1800	The finishing & semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel.
YG6	K15	14.95	90.5	1900	Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
YG8	K20	14.80	89.5	2200
YW1	M10	13.10	91.6	1600	Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel.
W2	M20	13.00	90.6	1800	The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs.
YT15	P10	11.4	91.5	1600	Suitable for the finishing and semi-finishing for steel and cast steel with a moderate feed rate and rather high cutting speed.
YT14	P20	11.6	90.8	1700	Suitable for the finishing and semi-finishing of steel and cast steel.
YT5	P30	12.9	90.5	2200	Suitable for the heavy duty rough turning of and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions.

Other grades for tungsten carbide brazed inserts may be offered according to customers' requirement.



TYPES: various type can be offered, the A Type, C Type, E Type, ISO standard,or European standard.

Other types of inserts may be offered according to customers' requirement.



Advantage:


Over 15 Years' efforts in making high quality tungsten carbide products.


Almost 7 years in doing importing and exporting business.


Rich experience in grade researching, mould designing, automatic press, HIP sintered, surface treating and quality control.


Different grades are available.


Large stock for order at once. Small order quantities accepted.




Business terms:

1. 10%- 30% Deposit and the balance against shipment.

2. Start producing after deposit.

3. Take photoes for customers' confirmation

4. Buyers pay the balance

5. We ship the goods according agreeable method by Express, AIR, or SEA.

6. Customers' feedback is very important for our improving!

Flexible payment terms: O/A, L/C, D/A,



contact:

Emily







Please feel free to contact me.

Looking forward to your inquiry!

Contact us if you need more details on Tungsten Carbide Brazed Inserts. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Ungsten Carbide Indexable Inserts、Carbide Brazing Inserts Type a Type B Type C. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Carbide Brazed Inserts Brazed Tips