| Grade | ISO Code | Density
g/cm3 | Hardness
HRA | T.R.S
MPa | Applications recommended | | YG3 | K05 | 15.10 | 92.0 | 1400 | Suitable for finishing of cast iron and nonferrous metal. | | YG6X | K10 | 14.95 | 91.5 | 1800 | The finishing & semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel. | | YG6 | K15 | 14.95 | 90.5 | 1900 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. | | YG8 | K20 | 14.80 | 89.5 | 2200 | | YW1 | M10 | 13.10 | 91.6 | 1600 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel. | | YW2 | M20 | 13.00 | 90.6 | 1800 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs. | | YT15 | P10 | 11.4 | 91.5 | 1600 | Suitable for the finishing and semi-finishing for steel and cast steel with a moderate feed rate and rather high cutting speed. | | YT14 | P20 | 11.6 | 90.8 | 1700 | Suitable for the finishing and semi-finishing of steel and cast steel. | | YT5 | P30 | 12.9 | 90.5 | 2200 | Suitable for the heavy duty rough turning of and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions. |
TYPE A
| | | Type | Dimensions (mm) | | L | t | S | r | a° | | A5 | 5 | 3 | 2 | 2 | - | | A6 | 6 | 4 | 2.5 | 2.5 | - | | A8 | 8 | 5 | 3 | 3 | - | | A10 | 10 | 6 | 4 | 4 | 18 | | A12 | 12 | 8 | 5 | 5 | 18 | | A16 | 16 | 10 | 6 | 6 | 18 | | A20 | 20 | 12 | 7 | 7 | 18 | | A25 | 25 | 14 | 8 | 8 | 18 | | A32 | 32 | 18 | 10 | 10 | 18 | | A40 | 40 | 22 | 12 | 12 | 18 | | A50 | 50 | 25 | 14 | 14 | 18 |
TYPE B
| | | Type | Dimensions (mm) | | L | t | S | r | a° | | B5 | 5 | 3 | 2 | 2 | - | | B6 | 6 | 4 | 2.5 | 2.5 | - | | B8 | 8 | 5 | 3 | 3 | - | | B10 | 10 | 6 | 4 | 4 | 18 | | B12 | 12 | 8 | 5 | 5 | 18 | | B16 | 16 | 10 | 6 | 6 | 18 | | B20 | 20 | 12 | 7 | 7 | 18 | | B25 | 25 | 14 | 8 | 8 | 18 | | B32 | 32 | 18 | 10 | 10 | 18 | | B40 | 40 | 22 | 12 | 12 | 18 | | B50 | 50 | 25 | 14 | 14 | 18 |
TYPE C
| | | Type | Dimensions (mm) | | L | t | S | a° | | C5 | 5 | 3 | 2 | - | | C6 | 6 | 4 | 2.5 | - | | C8 | 8 | 5 | 3 | - | | C10 | 10 | 6 | 4 | 18 | | C12 | 12 | 8 | 5 | 18 | | C16 | 16 | 10 | 6 | 18 | | C20 | 20 | 12 | 7 | 18 | | C25 | 25 | 14 | 8 | 18 | | C32 | 32 | 18 | 10 | 18 | | C40 | 40 | 22 | 12 | 18 | | C50 | 50 | 25 | 14 | 18 |
TYPE D
| | | Type | Dimensions (mm) | | L | t | S | | D3 | 3.5 | 8 | 3 | | D4 | 4.5 | 10 | 4 | | D5 | 5.5 | 12 | 5 | | D6 | 6.5 | 14 | 6 | | D8 | 8.5 | 16 | 8 | | D10 | 10.5 | 18 | 10 | | D12 | 12.5 | 20 | 12 |
TYPE E
| | | Type | Dimensions (mm) | | L | t | S | a° | | E4 | 4 | 10 | 2.5 | - | | E5 | 5 | 12 | 3 | - | | E6 | 6 | 14 | 3.5 | 9 | | E8 | 8 | 16 | 4 | 9 | | E10 | 10 | 18 | 5 | 9 | | E12 | 12 | 20 | 6 | 9 | | E16 | 16 | 22 | 7 | 9 | | E20 | 20 | 25 | 8 | 9 | | E25 | 25 | 28 | 9 | 9 | | E32 | 32 | 32 | 10 | 9 |
Other grades for tungsten carbide brazed inserts may be offered according to customers' requirement.
2. TYPES: Various type can be offered, the A Type, C Type, E Type, ISO standard, or European standard.
Other types of bars may be offered according to customers' requirement.
3. Business terms:
1.10%- 30% Deposit and the balance against shipment.
2. Start producing after deposit.
3. Take photoes for customers' confirmation
4. Buyers pay the balance
5. We ship the goods according agreeable method by Express, AIR, or SEA.
6. Customers' feedback is very important for our improving!
ZZ HARDMETAL established in 2007, as a big and famous manufacturer in Zhuzhou,China. We produce various kinds of tungsten carbide products,including Carbide Inserts,Carbide Rods,carbide tips, Carbide Strips, Carbide Plates,Carbide Wire Drawing Dies, carbide Cold Forging Dies, carbide punches, woodworking tools,mining drill bits,carbide buttons,etc.
Our customers spread all over 50 countries. We provide our customers the carbide products with good quality,competitive price,fast delivery time and reliable after sale service. To your reference, you can check more items from our website: www.zzhardmetal.cn
Contact us if you need more details on Carbide Tips. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Brazed Carbide Tips、Carbide Saw Tips. If these products fail to match your need, please contact us and we would like to provide relevant information. Product Categories : Carbide Brazed Inserts Brazed Tips
| | | | | |
